Scope of Delivery: - Festool Domino LA-DF 500 / 700 moulding stop Product Description: With this moulding fence from Festool, you can easily mill very narrow mouldings with a width of 22 - 70 mm using the corresponding Festool DF 500 and DF 700 dowel routers. The moulding stop is ideal for cleat and frame joints. Technical Data: - Dimensions: 21 x 12 x 4 cm - Weight: 190 g - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x universal saw carriage - 1x aluminium guide rail - 1x precision edge guide - 1x detailed set-up and operating instructions Product Description: Great projects always start with high-quality cuts. These cuts are easier to achieve with your circular saw in combination with the Rip-Cut edge guide for circular saws than you ever thought possible. The Kreg Rip-Cut transforms your circular saw into a precision edge guide tool that produces straight, clean and repeatable cuts - in plywood, MDF and other large panels. It produces straight, accurate and repeatable cuts without the need to measure, mark or hold the saw on the line, as it has a long edge guide that follows the straight edge of the board being cut. All you have to do is fix the saw at the desired measurement (up to 61 cm) using the built-in scale. The universal carriage is suitable for the most common saws with left and right saw blades. Technical Data: - Aluminium rail: 3" ( 76.2 mm ) wide and 30" ( 762 mm ) long - Materials: Aluminium and impact-resistant plastic polymer - Saw carriage: Works with saws with left and right saw blade and includes fence with scale and precision slider - Cutting thickness: Maximum 24" ( 610 mm ) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x KREG cross-cut fence and sawing aid 203 mm 90° / 45° ( KMA4000-INT ) Product Description: The KREG cross-cut fence and sawing aid is an indispensable accessory for every DIY enthusiast and professional. With this product, high-quality cross-cut cuts with an angle of 90° and 45° can be made with ease. The cross-cut fence and saw aid also enable cuts to be made through material up to 203 mm wide. Thanks to the individually adjustable indicator, you can always clearly see where the saw blade is cutting. Once the saw aid has been aligned, the indicator automatically jumps back so as not to come into conflict with the saw blade. Small support rails increase the contact surface of the saw before it cuts into the material, thus ensuring precise cutting. The KREG cross-cut fence and saw aid is equipped with GripMaxx™ anti-slip strips, which ensure a secure grip on the workpiece. The accessory is suitable for both right- and left-hand cutting circular saws and is easy to transport. The KREG cross-cut fence and sawing aid makes every circular saw even more versatile and precise. The product offers a simple and effective solution for precise cross-cuts and is therefore an indispensable tool for anyone who wants to achieve high-quality results. Technical Data: - Manufacturer: KREG - Manufacturer number: KMA4000-INT - Maximum cutting length: 203 mm - Adjustable to saw blade distances up to: 142 mm - Dimensions (L x W x H): 402 x 275 x 57 mm - Weight: 1.13 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: Product Description: Technical Data: For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 4x guide rail pieces (610 mm) - 1x movable end stop - 1x double-sided end stop - 2x self-adhesive measuring tape Product Description: This KREG Trak & Stop System transforms your mitre saw into a precision cutting system. The set includes four guide rail pieces, a movable end stop, a double-sided end stop and 3.66 m of self-adhesive measuring tape (reading direction: left-right). The length of the anodised aluminium guide rails is 610 mm (24 inches). The adjustable end stops can be set to different working positions. This eliminates additional work and makes sawing much easier. Technical Data: - Material: anodised aluminium - Length of guide rails: 610 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

El tope angular es ideal para cortes longitudinales, transversales y angulares en CS 70, CS 50 y CMS-GE. Corte longitudinal, sección transversal, corte en ángulo: a la perfección. Fortalezas y beneficios - Rápido y fácil de instalar en la ranura en V de la máquina - El bloqueo de los puntos angulares se puede desconectar en caso necesario. - Fácil de configurar y bloquear - El tope en ángulo con el tope se puede utilizar para cortes repetibles Áreas clave de aplicación - Ideal para cortes longitudinales, transversales y angulares. - Montaje rápido y sencillo en la ranura en V de la máquina - El bloqueo de los puntos angulares se puede desconectar en caso necesario. Adecuado para - para CS 70, CS 50, CMS-GE - para trabajar con 2 paradas - Tope para cortes angulares, transversales y longitudinales en la caja Si se utiliza con fines comerciales, ¡tenga en cuenta las normas de construcción!

Read more less

Scope of Delivery: - 1x Festool cross-cut fence KA-UG-R - 1x Festool cross-cut fence KA-UG-L Product Description: The Festool UG-KA-KS 60 is suitable for the UG - KAPEX KS 60 base frame and thus extends the working area of the cross-cut saw many times over. Technical Data: - Working height: 900 mm - Max. Max. dimensional length: 2400.00 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x KA-UG-KS 120-R cross-cut fence - 1x cross-cut fence KA-UG-KS 120-L - 2x measuring scale - 2x telescopic extension with scale - 2x fold-out stand - 1x instruction manual Product Description: The KA-UG-KS 120-R/L cross-cut fence makes using the KAPEX KS 88 / KS 120 considerably easier. In combination with the UG-KAPEX KS 120 base frame, beams and edging timber can be supported without any problems, enabling precise cutting to length of mouldings and profiles. The fold-out stand makes it possible to set up the machine without any further assistance. Thanks to the telescopic extension, a maximum length of 240 cm per side is possible, the length of the extension arm without telescope is 148 cm. A measuring scale is provided for quick and efficient work, and repetitive cuts are no problem thanks to the stop rider. This well-designed accessory saves time and labour. Technical Data: - Weight: 4.60 kg - Boom length (without telescope): 1480.00 mm - Max. Max. length: 2400.00 mm - Length of both stabilisers: 4800 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less