Show previous products

• 

  Ruko RUKO twist drill DIN 345 type N nominal Ø 13 mm ( 4000601303 )

  Mon, 12/15/2025

  Scope of Delivery: - Twist drill DIN 345 type N nominal Ø 13 mm Product Description: HSS-Co5 - DIN 345 - type N - point angle 118 ° - right-hand cutting - pointed cross cutting edge to DIN 1412 A - high-performance standard drill bit made from cobalt-alloyed HSS with higher heat resistance - ideal for drilling difficult-to-machine materials and for heavy-duty use - areas of application: for alloyed and unalloyed steel and cast steel (up to 1100 N/mm² strength), grey cast iron, malleable cast iron, high-chromium alloyed steels such as V2A and V4A, stainless and acid-resistant steels Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.15 mm/rev - Shank size: MK1 - Quality: profile groundFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €23,87

• 

  Ruko RUKO twist drill DIN 338 type N nominal Ø 5.8 mm ( 4000600179 )

  Mon, 12/15/2025

  Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 5.8 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.12 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €18,00

• 

  Ruko RUKO twist drill DIN 338 type N nominal Ø 18 mm HSS-Co5 ( 4000600109 )

  Mon, 12/15/2025

  Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 18 mm HSS-Co5 Product Description: HSS-Co5 - DIN 338 - type N - point angle 130 ° - profile ground - right-hand cutting - cross cut to DIN 1412 C - with stepped shank - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, tempered and case-hardened steels as well as stainless and acid-resistant steels - ideal for drilling larger drill diameters for all standard drills with a chuck up to 13.0 mm Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Shank length: 35mmFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €35,21

• 

  Ruko RUKO twist drill DIN 338 type N nominal Ø 16.5 mm HSS-Co5 ( 4000600106 )

  Mon, 12/15/2025

  Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 16.5 mm HSS-Co5 Product Description: HSS-Co5 - DIN 338 - type N - point angle 130 ° - profile ground - right-hand cutting - cross cut to DIN 1412 C - with stepped shank - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, tempered and case-hardened steels as well as stainless and acid-resistant steels - ideal for drilling larger drill diameters for all standard drills with a chuck up to 13.0 mm Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Shank length: 35mmFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €30,55

• 

  Ruko RUKO twist drill DIN 338 type N nominal Ø 12 mm HSS-Co5 ( 4000600097 )

  Mon, 12/15/2025

  Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 12 mm HSS-Co5 Product Description: HSS-Co5 - DIN 338 - type N - point angle 130 ° - profile ground - right-hand cutting - cross cut to DIN 1412 C - with stepped shank - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, tempered and case-hardened steels as well as stainless and acid-resistant steels - ideal for drilling larger drill diameters for all standard drills with a chuck up to 13.0 mm Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Shank length: 30mmFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €20,13

• 

  Options

  Ruko Broca helicoidal RUKO DIN 338 tipo N diámetro nominal 20 mm (4000600093)

  Alcance de la entrega: Broca helicoidal DIN 338 tipo N Ø nominal 20 mm Descripción del Producto: HSS · DIN 338 · Tipo N · Ángulo de punta 118 ° · rectificado de perfil · corte a la derecha · rectificado transversal según DIN 1412 C · con mango acodado · la broca helicoidal completamente rectificada tiene una mayor concentricidad · para acero, acero fundido aleado y no aleado (hasta 900 N/mm² de resistencia), gris, templado, nodular y fundido a presión, hierro sinterizado, alpaca, Grafito, aleaciones de aluminio de viruta corta, latón y bronce · Ideal para taladrar diámetros de broca más grandes para todas las brocas habituales con portabrocas de hasta 13,0 mm Datos técnicos: Dirección de corte: corte a la derecha Alimentación de acero hasta 800 N: 0,14 mm/rev. Calidad: perfil rectificado Longitud del eje: 35 mm

  Read more less

  Pre-order

  €30,67

  Options

• 

  Options

  Ruko Broca helicoidal RUKO DIN 338 tipo N diámetro nominal 17,5 mm (4000600088)

  Alcance de la entrega: Broca helicoidal DIN 338 tipo N Ø nominal 17,5 mm Descripción del Producto: HSS · DIN 338 · Tipo N · Ángulo de punta 118 ° · rectificado de perfil · corte a la derecha · rectificado transversal según DIN 1412 C · con mango acodado · la broca helicoidal completamente rectificada tiene una mayor concentricidad · para acero, acero fundido aleado y no aleado (hasta 900 N/mm² de resistencia), gris, templado, nodular y fundido a presión, hierro sinterizado, alpaca, Grafito, aleaciones de aluminio de viruta corta, latón y bronce · Ideal para taladrar diámetros de broca más grandes para todas las brocas habituales con portabrocas de hasta 13,0 mm Datos técnicos: Dirección de corte: corte a la derecha Alimentación de acero hasta 800 N: 0,14 mm/rev. Calidad: perfil rectificado Longitud del eje: 35 mm

  Read more less

  Pre-order

  €28,69

  Options

• 

  Ruko RUKO twist drill set DIN 338 type N nominal Ø 1-10x0.5 mm ( 4000600883 )

  Mon, 12/15/2025

  Scope of Delivery: - Twist drill set DIN 338 type N nominal Ø 1-10x0.5 mm Product Description: HSS - TiN-coated - DIN 338 - type N - point angle 118° - profile-ground - with straight shank - right-hand cutting - high-performance drill bit for all normal drilling work in steel and cast iron - in impact-resistant and break-proof plastic case Technical Data: - Quality: profile-groundFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €43,66

• 

  Options

  Ruko RUKO twist drill DIN 345 type N nominal Ø 30 mm ( 4000601337 )

  Scope of Delivery: - Twist drill DIN 345 type N nominal Ø 30 mm Product Description: HSS-Co5 - DIN 345 - type N - point angle 118 ° - right-hand cutting - pointed cross cutting edge to DIN 1412 A - high-performance standard drill bit made from cobalt-alloyed HSS with higher heat resistance - ideal for drilling difficult-to-machine materials and for heavy-duty use - areas of application: for alloyed and unalloyed steel and cast steel (up to 1100 N/mm² strength), grey cast iron, malleable cast iron, high-chromium alloyed steels such as V2A and V4A, stainless and acid-resistant steels Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.15 mm/rev - Shank size: MK3 - Quality: profile groundFor commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €90,10

  Options

• 

  Options

  Ruko RUKO twist drill DIN 345 type N nominal Ø 29.5 mm ( 4000601336 )

  Scope of Delivery: - Twist drill DIN 345 type N nominal Ø 29.5 mm Product Description: HSS-Co5 - DIN 345 - type N - point angle 118 ° - right-hand cutting - pointed cross cutting edge to DIN 1412 A - high-performance standard drill bit made from cobalt-alloyed HSS with higher heat resistance - ideal for drilling difficult-to-machine materials and for heavy-duty use - areas of application: for alloyed and unalloyed steel and cast steel (up to 1100 N/mm² strength), grey cast iron, malleable cast iron, high-chromium alloyed steels such as V2A and V4A, stainless and acid-resistant steels Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.15 mm/rev - Shank size: MK3 - Quality: profile groundFor commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €78,42

  Options

• 

  Options

  Ruko RUKO twist drill DIN 345 type N nominal Ø 27 mm ( 4000601331 )

  Scope of Delivery: - Twist drill DIN 345 type N nominal Ø 27 mm Product Description: HSS-Co5 - DIN 345 - type N - point angle 118 ° - right-hand cutting - pointed cross cutting edge to DIN 1412 A - high-performance standard drill bit made from cobalt-alloyed HSS with higher heat resistance - ideal for drilling difficult-to-machine materials and for heavy-duty use - areas of application: for alloyed and unalloyed steel and cast steel (up to 1100 N/mm² strength), grey cast iron, malleable cast iron, high-chromium alloyed steels such as V2A and V4A, stainless and acid-resistant steels Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.15 mm/rev - Shank size: MK3 - Quality: profile groundFor commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €66,60

  Options

• 

  Ruko RUKO twist drill DIN 345 type N nominal Ø 22.5 mm ( 4000601322 )

  Mon, 12/15/2025

  Scope of Delivery: - Twist drill DIN 345 type N nominal Ø 22.5 mm Product Description: HSS-Co5 - DIN 345 - type N - point angle 118 ° - right-hand cutting - pointed cross cutting edge to DIN 1412 A - high-performance standard drill bit made from cobalt-alloyed HSS with higher heat resistance - ideal for drilling difficult-to-machine materials and for heavy-duty use - areas of application: for alloyed and unalloyed steel and cast steel (up to 1100 N/mm² strength), grey cast iron, malleable cast iron, high-chromium alloyed steels such as V2A and V4A, stainless and acid-resistant steels Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.15 mm/rev - Shank size: MK2 - Quality: profile groundFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €46,32

Show more products